Produkty dla to łóżko (2)

Sanastark Reactive solution of mineral silicates, capable of forming binding and stabilizing compounds for hardening and consolidating treatments by reaction with hydrated calcium salts and moisture present in masonry, plaster, stone and concrete. Indicated in the preliminary treatments to the subsequent plastering or smoothing operations, of plasters and powdery mortars and wall casings in general, in green building interventions and in the restoration of period and monumental buildings. Sanastark is a solution based on mineral silicates, demineralised water and natural dispersant. It does not contains traces of resins, solvents or thinners. The application of Sanastark does not affect the original wall breathability. Cortical reinforcement and elimination of pulverisation of mortars, plasters and masonry jointing. Also suitable as a natural fixative before applying lime putty- or potassium silicate-based plasters and paints. Remove the soilings and saline manifestations by vigorous brushing. Then eliminate the residual dust. Saturated with water until you reach the condition of "saturated with dry surface". Apply by spraying, proceeding from the bottom up: it can also be applied with a brush with natural long bristles. In the presence of pronounced degradations proceed with several applications, wet on wet. From 0.20 to 0.30 kg of Sanastark for each square metre of surface to be treated, based on the porosity of the support. Plastic can 5 kg - Plastic can 10 kg - Plastic can 25 kg

Protech Sil Filler "Anti-crackling" basecoat based on siloxane water-thinnable resins, microfibre nylon, acrylic dispersions, fillers and specific additives, in a special highly water repellent mix ("lotus" effect). The special covering, filling (filler ) and vapour permeability capabilities, make it specific for renovating cracklings and small cracks, resulting from plastic and hygrometric shrinkage on existing plaster, before the next painting or coating with putty coat. The peculiar composition of Protech Sil Filler provides the performance of a real microporous filter, impervious to rain, it is exceptionally permeable to vapour: the "Sd" value is about ten times lower than that characteristic of normal acrylic paints. The product can then be applied on mineral media as well as on media treated with emulsion-based paints, providing a physical adhesion that is extremely permeable to vapour. Thanks to the physical structure of the binder, the silicone coating made with Protech Sil Filler, particularly resistant to light and weathering is even resistant to microorganisms. Renovation of vertical external façades characterised by significant presences of cracklings from shrinkage, also of width up to 1 mm. Regularisation of patches, of areas with different particle sizes and absorption. Particularly suitable for anti-cracking reclamation in buildings subject to protection as "cultural heritage". The support must be intact, dry and dust-free. Any biodeteriogenic settlements such as fungi, moulds, algae, lichens, etc. should be preliminarily tempered with specific products (CONSILEX ANTIMUFFA CLEANER and CONSILEX ANTIMUFFA). Where necessary it is necessary to provide suitable reinforcements with Sanastark. Static cracks exceeding 0.5 mm should be preliminarily filled with Fibrostuck. Apply at least 2 coats of Protech Sil Filler on the surfaces to be treated (about 125-150 g/m² per coat). It is recommended to "finish" the restoring treatment of the façade with the siloxane paint Protech Sil P. Apply from 0.35 to 0.60 kg of Protech Sil Filler per square metre of surface to be painted. Pail 25 kg